Isu Tender KTPC - Mesin CNC Waterjet.

Inilah mesin CNC yg dibeli.

Gambar ni diambil masa lawatan depa pi German

(Masa dan tarikh adalah benar).

Aku masih lagi dok tunggu jawapan dari Kedahlanie pasai "Isu Tender KTPC - Tender CCTV" malangnya tak mendapatr jawapan. Ataupun saja depa nak sembunyi fakta kot. Ataupun Ustat dah bagi warning kat anak sedara dia Hj. Sobri cuba tutup sebaik mungkin supaya maklumat tak bocoq lagi. Baru2 ni IT KTPC dah ambik tindakan sekat email dari kena intercept.

Dear All, We have opened an encrypted web mail access. Mail accessed through this web site that we have prepared are encrypted and if somebody intercepted the email, they will be see junks. We would like to advise you all to access this new web email access for security reasons. 1.       https://mail.khtp.com.my  secure access. Encrypted. Thank You. ITS Department.

Pelan2 kita selam benda ni.

Benda manusia buat segalanya serba mungkin.

Aku rasa ditarik baca komen dari seorang pembaca dari blog Kedah Times dlm artikal bertajuk: "Lagi pasal KTPC ..."

Lagu ni komen dia…

Tanpa Nama berkata... KHAMIS, JANUARI 27, 2011 5:09:00 PM

Ala awatnya nak heran sebab kepala (mastermind)dia Anuar Brahim oops Anuar Mat Sopak tu memang gila bermegah kat org yg kenai rapat dgn dia bahawa dia dah pi sumua tempat dlm dunia ni. kerja dia kolek point enrich. La ni dah tentu tahap platinum. Maka tiap2 tahun dia rancang melancung pakai duit rakyat ni atas tiket nak cari pelabur dan tengok mesin. Piraaah bisnez apa pun tarak masyuk...duit syarikat jugak habih kena sedut. Kalu tak masakan Kulim Techno Management (KTM) selalu tenat. Kerja taik minyak dia la ni semua org tau sampai pengurusan dulu Lembaga Pengarah KTM dah nak buang dia dah tapi lega di selamatkan PAS. Tu lah yg tahi tu tetap busuk walaupun di cover dgn kopiah putih dan jubah! Fikir2 kan lah

Aku nak cerita sikit pasai mesin yg dibeli oleh KTPC, sampai hari ni (16/01/2010 – masa dok korek maklumat) tak tau status dia…

Sapa2 ada maklumat, harap dapat kita kongsi bersama…

Balik cerita kita pasai mesin Waterjet CNC yg KTPC ni beli dengaq kata banyak masalah yg timbul dari segi perjanjian, delay, missed communication dan lain2 yg bersangkutan.

Kalau sembang bab tender di KTPC ni, dulu ada "Audit Committee" yg menyelenggarakan bab2 tender. Tapi la ni dah dihapuskan oleh Anuar Safar. Mungkin alasannya biaq org atasan saja yg membuat keputusan. Pengalaman dia kalau ada "Audit Committee" ni payah buat kerja... kah...kah...kah...(pinjam sat GMC).

Dikabarkan  dlm dokumen CNC Waterjet, syarikat Malaysia "Asian Autotec Sdn. Bhd." diberi tender membekalkan mesin tu. Juga dikabarkan syarikat tu ada hubungan dgn Anuar Safar (syarikat kroni). Dipercayai depa menggunakan syarikat Singapura "Bystronic Pte. Ltd." (equipment supplier) utk sebarang urusan memasukkan RM dlm poket depa sendiri.

Kalau ada kesangsian boleh rujuk "JADUAL RUMUSAN PENILAIAN TENDER UNTUK PAKEJ KTPC/TC/2010/HPWJ/116 TENDER FOR SUPPLY, DELIVERY,INSTALL AND COMMISSIONING OF ADVANCED CNC HIGH PRESSURE WATERJET CUTTING MACHINE." di KTPC. Tu pun kalau depa bagi, dlm dokumen tu tertulis syarikat bernombor 5/7 (mohon maaf sebab aku tak boleh attach pasai besaq sangat).

Harga mesin seperti tertulis  dlm kontrak (CONTRACT NO: KTPC/TC/2010/HPWJ/116) artikal 2 seperti di bawah:

“The Owner shall pay the Contractor a sum of Ringgit TWO MILLION NINE HUNDRED THIRTY NINE THOUSAND EIGHT HUNDRED EIGHTY SIX ONLY (RM2,939,886.00), hereinafter referred to as the “Contract Price”, for the said Project at the office of the Group Chief Executive Officer, Kulim Technology Park Corporation Bhd., Kulim Hi-Tech Park, Kulim, Kedah, Malaysia.  The Contract Price includes fabrication, assembly, factory test, supply, port handling, loading and unloading at the port discharge, transport and deliver to site, installation, test, commission, and maintain the equipment at  Techno Centre Building, Kulim Technology Park Corporation, Kulim Hi-Tech Park, Kulim, Kedah, Malaysia. The equipment and services referred to above is as per Attachment A and B. The Contract Price includes other costs and  charges such as contingencies, profitability, indirect cost, government duties, currency fluctuation, etc.”

RM2,939,886.00 adalah kos bagi:

“CLAUSE 2 - SCOPE OF WORK/SUPPLY

The Contract comprises the fabrication, assembly, factory test, supply, port handling, loading and unloading at the port discharge, transport and deliver to site, install, test, commission, and maintenance of the following equipment including the costs of :

1.       CNC High Presure Waterjet Cutting Machine, Accessories, Including Software & Hardware as per Document B1.

2.       System Setup, Installation and Commissioning for Civil, Mechanical & Electrical Work Incuding Wiring, Labour, Transportation and Material as per Document B1.

3.       Maintenance Contract Fee For 3 years after 2 years Machine Warranty Period as per Document B1.

4.       Training Fees (materials, trainer etc) at Manufacturer Premises and On-site Training as per Document B1.

5.       Contingencies, Profitability, Indirect Cost, Government duties, Currency Flactuation, ect as per Document B1”.

Perjanjian yg dibuat adalah antara:

KULIM TECHNOLOGY PARK CORPORATION BHD

President           

Kulim Technology Park Corporation  Bhd

Suite 3.01-3.02, 3rd Floor,

KHTP Business Centre, Kulim Hi-Tech Park,

P.O. Box 60, 09000 Kulim, Kedah Darul Aman.

Attention : En Ahmad Shiraz Kamarudin

Tel. : 04-403 2420  Fax No : 04-403 1973

email :  shiraz@khtp.com.my

dengan

ASIAN AUTOTEC SDN BHD

Managing Director

No. 15, Jalan Kota Raja 27/L, Seksyen 27,

Hicom Town Centre, 40400 Shah Alam, Selangor.

Attention : En  Abu Yazed b Bakar

Tel.:  03-5192 2005   Fax No. :  03-5192 2006

email :  yazedbakar@hotmail.com

Antara isu sekarang adalah:

Mengenai bayaran dan status pemasangan.

Shiraz dan Najmi (KTPC) telah dimaklumkan oleh ATEC bahawa KTPC terpaksa membuat bayaran mengikut perjanjian dan terdapat beberapa masalah bagi melakukan pemasangan.

Jawapan Shiraz kpd Hj... 

Salam Hj, Letter from Asian Autotec. I dah call this morning cakap dengan Mr Ling Meng Siah, Service Manager, Bystronic Singapore. Daniel on holiday. Wed next week baru balik. •        I dah mention kat dia water treatment unit mesti kena supply. Kalau tidak kita tak akan bayar. Dia kata tunggu Daniel balik. •        In the mean time Bystronic akan install temporary tank and filtered water kat machine untuk mereka buat testing. •        Bystronic juga akan ambil sample water kat Metex to be send to Switzerland for testing. •        I kata OK tapi payment kita tak akan release selagi water treatment unit tak deliver and bila Daniel balik I suruh dia discuss dengan asian autotec how to solve this problem. KTPC will not pay for the water system unit. •        Surat ni nak kena jawab balik. Should I send it to Sabki? Thanks Ahmad Shiraz Kamarudin Asst. Manager [Technology Development]

Hj. Anuar jawab:

Salam, Tak payah jawab lagi... I nak tau Daniel punya response... Regards, THAMS

THAMS - Tuan Haji Anuar Mohd Safar

Aku heran pasai pa Hj tak bagi Shiraz maklum pada Sabki dan nak check sendiri jawapan dati Daniel...? Daniel ni MD Bystronic Pte. Ltd.

Dlm masa tu mai pulak msg dari Mokhtar:

Salam Saidin, We are facing delay in  commissioning the Waterjet at METEX and this has raise concern from the President and Chairman. Appreciate if you could step in to assist Najmi resolve the issues. Delaying the commissioning will directly effect our revenue. Problems encountered are : •           Payment to suppplier •           Delivery of "Water Treatment System" form Main contractor. Please get the new target date from Najmi. TQ/mokhtar

dan Najmi METEX kpd Saidin KTMSB:

Salam En Saidin Status commissioning Water Jet telah berhenti pada 4/1/2010 dan Technical Engineer drp Bystronic telah pun kembali. Untuk makluman pihak tuan terdapat satu masaalah yang amat besar yang perlu diselesaikan diantara pihak KTPC,bystronic dan kontraktor Asian Autotec. Pihak kontraktor menyatakan  pembekalan Water Treatment System adalah bukan dalam skop pembekalan  mereka didalam surat seperti yang saya lampirkan. Water Treatment System ini adalah jantung kepada mesin tersebut. Masaaalah ini telahpun diamaklumkan kepada pihak KTPC , dan Encik Ahmad Shiraz sedang berusaha untuk mencari jalan terbaik menandatangani permasaalahan ini. Sekian Terima Kasih & Wassalam Najmi Husin Metex Centre

Apa cerita semua ni...?

Masing2 cuba menunding jari. Masalah timbul sapa pun tak mau mengaku. Cuba menutup pekong masing2, sedangkan kalau refer balik pada agreement seharusnya KTPC yg dipertanggungjawabkan:

CLAUSE 9 - DELIVERIES AND PAYMENTS

(a)              The Contractor shall be responsible for the delivery of the equipment to be supplied under this Contract to the point of delivery elsewhere stated herein.  The Contractor shall notify the Owner in writing of such delivery and shall hand over the equipment and obtain a receipt therefor from the Owner.  The issue of such receipt shall in no way relieve the Contractor from his responsibilities for replacing defective or damaged equipment under Clauses 4 and 5 hereof.

(b)              The following payment procedure shall be adopted:

i)  On Signing of Contract	10 % of the Contract Price
iv) Factory Acceptance Test/Technical Training at      Equipment Manufacturer’s premises	10 % of the Contract Price
v) Delivery of  Equipment     (DDU KHTP Techno Centre)	70 % of the Contract Price
vi) Provisional Acceptance	5 % of the Contract Price
vii)  Final Acceptance and Completion of Scope of       Work/Supply (Clause 2)	5 % of the Contract Price

(c)              Owner shall send representative(s) to the Factory Acceptance Test. If Owner is unable to do so, then Contractor is allowed to proceed with payment claim. 

Terlalu panjang aku nak bongkarkan, bukanya apa, takut hangpa tak paham nanti. Aku rasa kalau SPRM masuk nanti baru semua dapat paham.

Kpd yg tak paham, kita boleh tanya dlm komen. Kalau yg tau lebih dati apa yg aku tau, boleh tambah dlm komen.

Gambar Lawatan...